CBADEN MACHINERY (PAPER SHEETING MACHINE) GROUP
Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Model DTCP 55

Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Introduction :

Manufacturer of Cbaden Superior Machine Group design and build this Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Model DTCP 55 ,it is improved by the new technic of our company, which make up a blank in China market. It , with the five unwinding roller , has the highest precision that can be instead of foreign machines ,the output is around 30 ream . It is the best choose among the manufactures who produce medium or high level products. This machine is suitable for cutting the large coil packaging material(such as Gloss photo paper, digital photo paper, ordinary paper, coated paper, board paper,  Gold or  Silver cardboard, holographic paper, cigarettes & wines packing and printing material .etc) , paper & plastic complex material and fiber material, etc.

<-------- Can Move Left or Right -------->
Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

<-------- Can Move Left or Right -------->
Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

<-------- Can Move Left or Right -------->
Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

<-------- Can Move Left or Right -------->
Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line

This machine is fully automatic cutting and packing  the A4 ,the packing way for the A3 paper is by manual.

Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Main Structure:

1. Non-shaft paper rising shelves of the ground controlling system------ five  sets

2. Advanced tension controlling system ------ Five sets.

3.Four sets of anti-warping mechanisms------Five sets.

4. Longitudinal cutting knife groups------six  sets.

5. Simultaneous cross-cutting knife groups-----One set.

6. High-speed paper feeding system----- One sets

7. Low-speed paper feeding system----- One sets

8. Waste paper automatically discharging system-----One set.

9. Making papers in order of 2D oscillation, screw rod lifting device of paper reams collecting system------One set.

10. PLC reams of paper counting device------One set.

11.  Paper reams longitudinally and transverse discharging equipment-----One set.

12.  PLC error alarm machine haulting system and PLC controlling equipment ------One set.

Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Main Technical Parameter:

<-------- Can Move Left or Right -------->

Gross width

1054mm

Net  width

1050mm

Number   of cutting

5  rollers 5 slittings-A4 210mm(width)

Diameter  of paper roll

400-1200mm

Diameter  of paper roll's core

3"(76.2mm)-6(152.4mm)

Paper  grade

High  grade copy paper, writing paper, two-side offset paper etc.

Weight  of paper sheet

60-100g/

Length  of paper cutting

A4(297mm)

Paper quantity

0-500pages

Ream  height

65mm(Max)

Designing speed of paper cutting

375m/min

Times of  cutting

775/min

Cycle  time of ream exhausted

7.2/min

Production speed of paper cutting

200-260m/min

Times of  cutting

650/min

Cycle  time of ream exhausted

6-7  Cycles/min(28-35 reams/min)

Load of  paper cutting

(max)400g/(4×100g/)

Paper  cutting accuracy

±0.2mm(Permissible error)

Paper  cutting condition

1. Speed  not change 2.Paper roll with no breakage 3. Qulified paper rolls.

Transmission

AC  Frequency conversion, stepless speed regulating

Main  power source

3phase/4line/380v/50Hz

Adjustable voltage

220V  AC/22V DC

Installed capacity

22KW

Air  consumption

300NL/min

Pneumatic pressure

0.6-0.8  mpa

Machine   Weight

19T

Machine  dimension(cutting machine)

20000×2960×2100mm


Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production Line Main Technical Parameter:

<-------- Can Move Left or Right -------->

Working speed

28-35(pack/min.)

Feeding speed of the paper  cover

28-35(pcs /min.)

Packing size

210×297×50mm(each  pack is 500 ream)

Size of the paper cover

550-560mm×386mm

Power

380V 3 phase and 4 lines

Voltage

6.5kw

Voltage of the gluing system

2.25 kw

Air

0.6-0.8mpa

Weight of machine

2T

Dimension of the machine

3400×3300×1600mm

A4 paper sheeting and wrapping machine|copy paper cutting and folding machine|paper folding machine|copy paper folding machine|A4 paper packing machine

CBADEN Machinery (Paper Sheeting Machine) Group | Five Roller High Speed Copy A4 A3 Copy Paper Cutting and Packing Production line